Quick Answer: Haier sells ductless mini splits across three real tiers — the entry-level Tempo series (9,000-24,000 BTU single-zone, up to roughly 17-17.5 SEER2), the mid-tier FlexFit series (single-zone up to 45,000 BTU, multi-zone up to quad-zone), and the high-capacity MRV-S series (up to 5 zones off one 36,000 BTU outdoor unit). Installed pricing runs roughly $2,500-$6,000 for a single-zone 12,000 BTU Tempo or FlexFit system and $4,200-$12,000 for a 3-5 zone multi-zone setup, all pro-install only. The warranty is 5-year parts / 7-year compressor unregistered, extending to 10 years on both if you register within 60 days — though Haier’s own fine print notes not every model qualifies for that extended tier.
There’s also a naming wrinkle worth knowing before you compare quotes: Haier and GE’s ductless systems aren’t two competing brands — they’re the same hardware sold through overlapping channels.
Haier’s three ductless tiers compared
| Series | Configuration | Efficiency | Install type | Best for |
|---|---|---|---|---|
| Tempo | Single-zone, 9,000-24,000 BTU | Up to ~17-17.5 SEER2 (115V), 18 SEER (230V, pre-SEER2 rating) | Pro (braze + vacuum) | Budget-tier single room, moderate climates |
| FlexFit | Single-zone up to 45,000 BTU; multi-zone up to quad-zone | Varies by size; competitive mid-tier spec sheet | Pro (braze + vacuum) | Larger single rooms or 2-4 room multi-zone projects |
| MRV-S | Multi-zone, up to 5 zones off a 36,000 BTU outdoor unit | High-capacity, light-commercial-grade system | Pro (braze + vacuum) | Whole-home or light-commercial zoning |
1. Haier Tempo — the entry-level single-zone tier
Haier Tempo Series Single-Zone (9,000-24,000 BTU)
- Tempo's 115V models (09TE1, 12TE1) carry partial SEER2 figures around 17-17.5, while the 208-230V models (12TE2, 18TE2, 24TE2) are still listed with legacy SEER ratings up to 18.0 — a real step behind the 20+ SEER2 floor most other pro-install brands on this site now hit at the same tier.
- Haier mini split units across the 9,000-24,000 BTU range run roughly $900-$3,800 in hardware, with a typical 12,000 BTU system installing for about $2,500-$6,000 total depending on line length and electrical work, per current HVAC cost-guide breakdowns.
- Tempo is the tier to price if the Haier or GE name specifically matters and your room doesn't need a cold-climate heating floor — it isn't the efficiency leader on this site's brand list.
Try Amazon Prime free for 30 days to get a condenser pad and surge protector delivered before your installer shows up — like every pro-install brand on this site, Haier’s hardware doesn’t ship with either. See our installation cost guide for what labor typically adds on top of the hardware price above.
2. Haier FlexFit — the mid-tier single and multi-zone pick
Haier FlexFit Series (Single-zone to 45,000 BTU, multi-zone to quad-zone)
- FlexFit scales further than Tempo on both ends — a single oversized room (up to 45,000 BTU) and multi-room projects (dual, triple, and quad-zone outdoor units, e.g. a 22,600 BTU triple-zone 3U24MS2VHB) run off the same series name.
- A 3-5 zone multi-zone FlexFit or MRV-S system totaling 36,000 BTU typically installs for $4,200-$12,000, with buyers paying roughly $900-$4,800 for the hardware itself plus $500-$3,000 for installation depending on zone count and electrical work, per current HVAC pricing guides.
- This is the tier to compare against Cooper & Hunter or Gree's multi-zone lines if Haier's name or GE's dealer-support network is the deciding factor over a lower price elsewhere.
See our best multi-zone mini split roundup for how a FlexFit multi-zone quote stacks up against MRCOOL’s DIY multi-zone kits on total project cost.
3. Haier MRV-S — high-capacity multi-zone, bordering on light-commercial
Haier MRV-S Series (Up to 5 zones, 36,000 BTU outdoor unit)
- MRV-S is Haier's largest residential ductless tier — "MRV" is the same acronym family as "VRF" (variable refrigerant flow) in commercial HVAC, and running 5 zones off a single 36,000 BTU outdoor unit puts this series closer to a light-commercial zoning system than a typical home mini split.
- If a whole-home retrofit is genuinely approaching VRF territory — 5+ rooms, mixed load types — see our mini split vs VRF guide for where a residential multi-zone system like MRV-S stops being the right scale and a true commercial VRF system starts.
The Haier/GE naming wrinkle worth knowing before you quote
Haier and GE aren’t separate competitors that happen to sell similar ductless systems — Haier bought GE Appliances from General Electric in 2016 and holds the right to use the GE brand name on appliances through 2056. Since January 1, 2017, GE Appliances has used Haier-manufactured products, including ductless mini splits, as part of its own go-to-market lineup, and GE Appliances’ Air & Water Solutions division now backs Haier’s ductless support and distribution infrastructure directly. In practice this shows up on the hardware itself: several retailer and distributor listings carry a dual “GE Haier” model designation (for example the AW12TE1VHA Tempo indoor unit) on the exact same SKU. So a “GE mini split” search and a “Haier mini split” search frequently land on identical hardware sold through overlapping dealer channels — worth knowing before assuming a GE-badged quote and a Haier-badged quote from two different installers are actually two different systems to compare.
Where Haier fits against the rest of this site’s brand list
Haier’s Tempo tier trails the field on efficiency — Mitsubishi’s Hyper-Heat H2i (29.9 SEER2, -22°F), LG’s Art Cool Deluxe (-31°F), and even budget-focused Bosch’s Climate 5000 (20-22 SEER2) all beat Tempo’s ~17-17.5 SEER2 ceiling. FlexFit closes some of that gap at the mid-tier, and MRV-S competes on zone count rather than per-zone efficiency. See our mini split brands breakdown for the full field, or our Mitsubishi mini split review and Daikin mini split review if cold-climate heating depth matters more than brand name.
The bottom line
Buy Haier’s Tempo tier only if the Haier or GE name specifically matters and your climate doesn’t demand a cold-weather heating floor — it isn’t competitive on raw SEER2. FlexFit is the more sensible pick for a larger single room or a 2-4 zone project, and MRV-S is worth a look only if a whole-home retrofit is genuinely approaching 5-zone, light-commercial scale. Whichever tier you’re quoted, confirm whether it’s eligible for Haier’s extended 10-year registered warranty before counting on it — not every model qualifies. Still comparing brands before you commit? See our best mini split roundup or our mini split brands guide for the full field.